Sign in

Please enter your email below and we will send you a new password.

Sign in with

Projecta HDBC20 6, 12 & 24 VOLT 12A WorkSHOP Car Truck Charger & ENGINE STARTER

Sku: HDBC20

$715.95 was $1,432.95 Save 50%
Reward Points You will earn 716 Point for purchasing this product.
  • LED Indication

    OVERLOAD (Red LED Flashing):  The LED will flash when the transformer or the current regulators (SCR’s) have got too hot

    POWER ON (Red LED ON): The LED comes on when connected to power and the charger is switched on 

    POWER ON (Red LED Flashing): Indicates that the battery clamps have been connected in reverse polarity

    Charging (Orange LED on): The LED comes on when the battery is charged 

    Fully charged (Green LED on): The LED indicates that Voltage is being displayed

    VOLT (Red LED ON): The LED indicates that Amps or current is being displayed

     AMP (Red LED ON): The LED indicates that Amps or current is being displayed

  • Override Button

    The battery charger measures the battery voltage at the clamps to determine if the battery is correctly connected. A reading above 3V will activate the battery charger. In some instances where the battery is extremely flat, it is possible to have correct connection and the battery to be below the 3V limit. In this instance check the battery leads to ensure they are connected correctly and press the OVERRIDE button to activate the battery charger.

  • Multi Voltage

    Suitable for charging 6V, 12V & 24V batteries.

  • Engine Start

    If you need to get going and the battery is flat then the engine start will help you out. Connect the charger to the battery, set it to engine start mode for 5 minutes, then start your engine.

  • 0–14 Hour timer

    Automatically turns the battery charger off after a set time. The timer has 1 hour intervals with a maximum of 14 hours. This switch can also be set to permanently ON.

  • Toroidal Transformer

    Using the latest technology in transformer design, toroidal transformers don’t use a solid iron core (like traditional transformers) making them lighter and more compact. They deliver more power than a traditional transformer charger of the same size.

Specifications

  • Type: Manual and Automatic 

  • Input: 240VAC 50HZ

  • Input power: 1.35A (324W)

  • Output Voltage: (Nominal): 6VDC / 12VDC / 24VDC

  • Output lead specifications: 6mm2 cable

  • Size: 301x264x161mm

  • Weight: 8.6kg       

  • Suitable for charging: (motorbikes, small to large cars, trucks and tractors)

Warranty

2 Year Warranty

What’s In Box

1 x BATTERY CHARGER

Shipping

Returns

Reviews